Filter
Top Products
English - 33
Resetting the Picture Settings to the Factory Defaults
1 To select the desired picture mode, follow the Changing the Picture Standard
instructions numbers 1 and 2. (see page 24)
2 Press the ▲ or ▼ button to select Picture Reset, then press the ENTER button.
Press the ◄ or ► button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
➢
Each mode can be reset.
Changing the Mode
Provides the function to turn on the 3D Effect. You can choose
between Mode1 and Mode2. To achieve the 3D effect, the 3D glasses shutter back
and forth from the left to right and vice versa (left/right sync).
1 Connect the TV, PC and 3D IR Emitter as shown in the gure.
2 Press the SOURCE button to select HDMI3/DVI.
3 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
4 Press the ▲ or ▼ button to select Picture Options then press the ENTER
button.
Press the ▲ or ▼ button to select 3D Effect
then press the ENTER button.
5
Presss the ▲ or ▼ button to select Off, Mode1, or Mode2, then press the
ENTER button.
Press the EXIT button to exit.
Off: Turns the 3D Effect function off.
Mode1: Mode 1 operates with right sync rst.
Mode2: Mode 2 operates with left sync rst.
➢
If the 3D effect is not working properly, it means the Mode and 3D glasses may
not be syncing properly. To put them in sync, switch to the other mode.
Easy Setting
1
Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select 3D Effect.
3 Press the ENTER button to start the 3D Effect.
➢
To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
➢
3D glasses (including the Emitter) not manufactured by Samsung, RealD, or ilixco may not be supported.
➢
The 3D glasses and the Emitter must be manufacturer by the same company.
➢
If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or
a headache.
Picture
Detailed Settings
Picture Options
PictureReset ►
OK
Cancel
Picture
Detailed Settings
Picture Options
PictureReset ►
ReturnEnter
Picture Options
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
Color Gamut : Normal
3D Effect : Off
►
Move
ReturnEnter
Picture Options
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
Color Gamut : Wide
3D Effect : Off
Move
Off
Mode1
Mode2
TOOLS
Move
Enter
Exit
3D Effect : Off
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer :
Off
BP68-00660A-00Eng_1.indd 33 2008-02-11 오후 8:39:35