Filter
Top Products
ENG-19ENG-18
Your DVD-VCR displays most information both on the
DVD-VCR and the television.
You can choose to display or hide this information on
the television screen (except for the SEARCH,
Programming MENU and Timer functions, which
cannot be hidden).
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons, until the
Screen Messages option is selected.
3 To... Press OK or
❿
, until...
Display on-screen information On is displayed.
Hide on-screen information Off is displayed.
4 On completion, press RETURN twice to exit the menu.
Screen Messages
Language : English
User Set
Auto Power Off : Off
Install
Screen Messages : On
On
Off
Selecting the Cassette Type
Repeat Play
If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
1 After pressing the MENU press the corresponding
,
❷
buttons to select the VCR option.
2 Press the OK or
❿
buttons to select this option.
Result: The VCR Setup menu is displayed.
3 Press the corresponding
,
❷
buttons, until the
Tape Select option is selected.
4 Press the OK or
❿
buttons as many times as
required, until the correct cassette length is
displayed.
E180
E240
E 300
E260
5 Press RETURN twice to exit the menu.
Repeat Play : Off
VCR Setup
Tape Select : E180
E180
E240
E260
E300
VCR Setup
Tape Select : E180
Repeat Play : Off
Off
On
You can set repeat play to repeat the tape continuously
from beginning to end.
To... Press OK or
❿
, until...
Repeat play On is displayed.
Do not wish to repeat play Off is displayed.
The Auto Power Off feature automatically turns off
your DVD-VCR if no signal is received and you do not
press any button for the selected time.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons, until the
Auto Power Off option is selected.
3 Press the OK or
❿
buttons, until you select the time
of Auto Power Off interval.
➝
Off
➝
1Hour
➝
2Hour
➝
3Hour
4 On completion, press return twice to exit the menu.
Auto Power off
To prevent delays or over-runs the VCR has a function
called VideoPlus Extend allowing you to extend the
recording time by up to 60 minutes.
➢
Only use if PDC is not available or set to OFF.
1 After pressing the MENU, press the OK or
❿
.
2 Press the corresponding
,
❷
buttons to select
the User Set option.
3 Press the OK or
❿
buttons to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding
,
❷
buttons, until the
VideoPlus Extend option is selected.
5 Press the OK or
❿
buttons to set the VideoPlus
Extend time by increments of 10 minutes.
6 To turn off, press OK or
❿
buttons repeatedly until
Off shows.
VideoPlus+ Extend
★
(SV-DVD540/SV-DVD545Only)
Colour System : Auto
NICAM : On
IPC : On
VideoPlus Extend : Off
User Set
Off
10
20
30
40
50
60
Language : English
User Set
Screen Messages : On
Install
Auto Power Off : Off
Off
1Hour
2Hour
3Hour
Protecting a Recorded
Cassette
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
1 If you wish to protect a cassette, break off the tab
using a small screwdriver.
2 To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
You can record a cassette at two different speeds:
◆
SP (Standard Play)
◆
LP (Long Play)
In Long Play modes:
◆
Each cassette lasts twice as long
◆
The recording is of a slightly lower
quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
Selecting the Recording Speed
T
ype Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or 4 hours and 20 mins.
E-300 300 mins. or 5 hours
00374C SV-DVD440/XEU 1/30/04 5:07 PM Page 18