Filter
Top Products
Pre-operation preparation
11
9
Select "CONFIRM" using the control button (}~)
and press the ENTER button.
The unit automatically restarts, the initializing screen is
displayed.
Once the initialization is complete and the live screen is
displayed, the displayed date and time are updated.
b Correcting the set time
When a new time earlier than the previous recording time is
set, the recording data that will be erased, showed in range
A, is displayed on the clock update confirmation screen.
Confirm the time before selecting "CONFIRM" as any video
data recorded after the set time will be erased.
1
Follow steps 1 to 3 of the CLOCK SET procedure.
2
Select "LANGUAGE" using the control button ({|)
and select the display language using the control
button (}~).
Once a language has been selected the display
language changes.
Language selection:
If multiple devices are connected terminator settings are
necessary at both ends.
• When multiple devices are connected,
make the termination switch "ON" on the first and last
device you connected.
• When multiple devices are connected,
make the termination switch "OFF" except the first and last
devices that you connected.
B
NO VIDEO
CH6
NO VIDEO
CH2
NO VIDEO
CH10
NO VIDEO
CH14
NO VIDEO
CH5
C
CH1
NO VIDEO
CH9
NO VIDEO
CH13
NO VIDEO
CH7
NO VIDEO
CH3
NO VIDEO
CH11
NO VIDEO
CH15
NO VIDEO
CH8
NO VIDEO
CH4
NO VIDEO
CH12
NO VIDEO
CH16
2009/05/03 09:04:54
2%
:A
INTIALIZING...
Ver: XXXXXX.XX.XXXX(YYYYMMDD)
CLOCK SET
CANCEL CONFIRM
Caution: If you update to new T/D,
recorded data between new and rec-end T/D
will be deleted.
New T/D 2009/ 5/11 13:43:39
Rec-end T/D 2009/ 5/11 13:53:45
A
Previous recorded time
Set time
C
Setting the language (LANGUAGE)
D
Setting the RS-485 termination switch (SANYO
SSP side)
If the termination switch is not set, the correct data will
not be delivered to each unit.
SYSTEM
DVR ID DVR
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT YYYY/MM/DD
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE ENGLISH
REMOTE CONTROL ID 00
SW
ON
1
234
System controller
Digital video recorder
Termination switch
ON
RS485 Termination
switch (TERM) ON
RS485 Termination
switch (TERM) OFF
L8HBT_WA(DSR-2116_2108)(GB).book 11 ページ ２００９年５月２７日 水曜日 午後４時５０分