Sanyo DSR-2108 DVR User Manual


 
LIVE settings
32
To set the video settings on each channel.
Select an item for each setting using the control button ({|)
and select a setting value using the control button (}~).
Setting a CHANNEL and the channel designation
1
Select "CHANNEL" using the control button ({|)
and select a channel from the following channels
using the control button (}~), press the ENTER
button.
Selections: CH1 - CH16
In DSR-2108, CH1 - CH8.
The CHANNEL screen used for channel settings is
displayed.
When not changing the designation of the channel, only
select a channel.
2
Select the input position using the control button
({|) and select input characters using the control
button (}~).
Character selection: (Refer to "DVR ID input display
list": P80)
Press the EXIT/STOP button once operations are
complete.
Changing the present CH1 display to HALL-1F
(Example).
Setting the DISPLAY
To select "DISPLAY", and set the screen display.
ON: Displays live videos
OFF: Does not display live videos
Memo: The display of screen information, such as time and
date and channel, depends on the settings of the
OSD. (P31)
Setting the BRIGHTNESS
To select "BRIGHTNESS" and adjust the brightness of
the videos.
The brightness of the video changes in real time.
(0 - 100 %)
Setting the CONTRAST
To select "CONTRAST" and adjust optimally the dark
parts and bright parts of the video.
The contrast of the image changes in real time.
(0 - 100 %)
HUE settings
To select "HUE" and adjust the hue of the video.
The hue of the images changes in real time.
(0 - 100 %)
Setting the SATURATION
To select "SATURATION" and adjust the saturation of the
video.
The saturation of the images changes in real time.
(0 - 100 %)
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the live
screen.
Sets the alarm input/output conditions of the alarm input/
output terminal.
1
Select "ALARM-SET" using the control button
({|) and press the ENTER button.
The ALARM-SET screen is displayed.
2
Select "ALARM OUT" using the control button
({|) and set whether or not an alarm signal
should be output through this unit using the
control button (}~).
ENABLE: An alarm signal is output.
DISABLE: No alarm signal is output.
3
Select "ALARM OUT NO." using the control button
({|) and specify the alarm output terminal number
(1 - 4) using the control button (}~).
Sets the alarm output conditions of the specified
alarm output terminal.
Setting the ALARM IN
An alarm signal is output when the specified external alarm
input terminal receives an input.
1 Select "ALARM IN" using the control button ({|).
2 Select the setting position (4 positions) using the control
button (}~).
3 Select the input terminal number (1 - 16) using the control
button ({|).
In DSR-2108, input terminal number (1 - 8).
4 Press the ENTER button.
Setting the MOTION ON
An alarm signal is output when the specified video input
terminal receives a MOTION detection signal.
1 Select "MOTION ON" using the control button ({|).
D
Setting a CHANNEL
CHANNEL
H A L L - 1 F
- - - - - - - -
E
Alarm input output settings
ALARM-SET
ALARM OUT ENABLE
ALARM OUT NO. 1
ALARM IN -- -- -- --
MOTION ON -- -- -- --
VIDEO LOSS ON -- -- -- --
HDD ERROR OFF
ALARM DURATION 5 SEC
ALARM IN NO. 1
TYPE ---
L8HBT_WA(DSR-2116_2108)(GB).book 32 ページ 2009年5月27日 水曜日 午後4時50分