Filter
Top Products
SYSTEM settings
41
Allows to set an ID number on the supplied remote control
and use it as an exclusive remote control when multiple units
are connected.
The initial value is set to "00" and the remote control display is
displayed on the monitor, remote operations are always
available.
b Operating this unit via the remote controller ID
(Example: 4)
1
Select "REMOTE CONTROL ID" using the control
button ({|) and select the ID number (Example:
04) using the control button (}~).
Selection: 01/02/ ... 98/99
2
Press the EXIT/STOP button repeatedly to return to
the live screen.
The remote display of the live screen disappears, an ID
number is necessary to perform remote operations.
3
Press the ID button of the remote control and press
"04" using the numeric buttons.
The remote control display reappears, the ID number
04 set in the SYSTEM settings allows the operation of
this unit.
Memo: The remote control ID (04) currently in use is
displayed on the monitor screen.
If no remote control ID has been set "A (ALL)" is
displayed.
L
Setting a REMOTE CONTROL ID
CH1
R
2009/05/03 09:04:54
2%
:A
SYSTEM
DVR ID DVR
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT MM/DD/YYYY
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE ENGLISH
REMOTE CONTROL ID 00
Remote control display
REC/STOP ALARM
ID
123
456
78
0
9
10
3
3
SYSTEM
DVR ID DVR
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT MM/DD/YYYY
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE ENGLISH
REMOTE CONTROL ID 04
2009/05/03 09:04:54
2%
2009/05/03 09:04:54
2%
:04
L8HBT_WA(DSR-2116_2108)(GB).book 41 ページ ２００９年５月２７日 水曜日 午後４時５０分