Filter
Top Products
10 English
Additions and Changes to Network Operations2
The following menu items have been added to the “ALARM NOTICE SET” screen under “ADVANCED MENU SET”.
These menu items are not available on the DVR side.
1 Support for SSL communications
Now you can send alarm notifications via SSL
communications.
[Settings] ( indicates default setting)
2 Specifying the SMTP port number
Enter a port number you want to use for SMTP (send)
within the range of 0 to 65535. (Default: 25)
3 Specifying the POP3 port number
Enter a port number you want to use for POP3 (receive)
within the range of 0 to 65535. (Default: 110)
4 Sending warning notifications
You can configure the main unit to send warning notification
mail messages when the following problems are detected in
the functionality and operation of the main unit.
You can configure the warning notification feature the same
way as the alarm notification feature. All settings default to
“OFF”; turning “ON” an item causes the main unit to send
warning mail when the corresponding condition is detected.
z HDD:
The hard disk is faulty.
z V. LOSS:
The video signal is disconnected.
z FAN:
The fan is faulty.
z NON REC:
The DVR has stopped recording.
z FULL:
Any one of the recording areas on the hard disk has
reached the “remaining-space” warning level or has
become full.
z POWER:
The power has turned off and back on again.
z When you want to use the warning notification feature,
choose “ON” in the “ALARM NOTICE” column A.
z The “USE” column B controls the settings for alarm
notification, and does not affect the warning notification
feature. Regardless of the settings in the “USE” column,
notifications with “ON” settings are in effect.
Newly Added Alarm Notification Menus (P201)
2
1
4
3
A
B
(added)
(added)
(added)
(added)
Setting Description
OFF Disables SSL support.
ON Enables SSL support.