Sanyo PLV-HD2000E Projection Television User Manual


 
19
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
RESET
FOCUS
ZOOM
ON-OFF
SELECT
q
w
y
u
!0
e
r
t
o
i
!2
!3
!4
!6
!7
!8
!5
!1
!8 RESET switch
Slide this switch to the "RESET" to initialize the remote control code.
(P20, 40)
w SIGNAL EMISSION indicator
This indicator lights red while a signal is being sent from the remote control
to the projector.
e SCREEN button
Selects image screen. (P29)
r ZOOM button
Adjusts zoom. (P24)
!6
INPUT 1-4 buttons
Selects input source (INPUT 1-INPUT 4). (P25)
u POINT (UP/DOWN/LEFT/RIGHT) button
Selects an item or adjusts value in the On-Screen Menu. (P21)
o IMAGE (1-10) buttons
Selects image levels (IMAGE 1 - IMAGE 10). (P33)
!2 AUTO PC button
Operates the Auto PC adjustment function. (P30)
!3 NO SHOW button
Turns the picture into black image. (P24)
!4 MENU button
Opens or closes the On-Screen Menu. (P21)
t FREEZE button
Freezes the projected picture. (P24)
!1 POWER ON-OFF button
Turns the projector on or off. (P23)
!5
LENS SHIFT button
Selects LENS SHIFT function. (P24)
y FOCUS button
Adjusts focus. (P24)
!7 IMAGE button
Selects image levels. (P33)
q SELECT button
Executes the item selected. (P21)
!0 WIRED REMOTE JACK
When using as Wired Remote Control, connect Remote Control Cable to
this jack.
Battery installation is required when using as Wired Remote Control.
i SELECT button
Executes the item selected. (P21)