Filter
Top Products
27
BASIC OPERATION
SYSTEM SELECT
This projector automatically tunes to most different types of computers based on XGA, SXGA, SXGA+, WXGA or UXGA
(refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 53). When a computer is selected, this projector
automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to
be set manually.)
The projector displays one of the Auto, -----, Mode 1 ~ Mode 20, or the system provided in the projector.
When projector cannot recognize connected signal as PC
system provided in this projector, Auto PC Adjustment
function operates to adjust projector and message “Auto”
is displayed on SYSTEM Menu icon.
When image is not provided properly, manual adjustment
is required. (Refer to P31 and 32.)
There is no signal input from computer. Make sure
connection of computer and a projector is set correctly.
(Refer to TROUBLESHOOTING on page 46.)
Auto
––––
SYSTEM SELECT Menu icon
Displays system being selected.
SYSTEM MENU
SELECT COMPUTER SYSTEM MANUALLY
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SYSTEM SELECT Menu icon.
Press POINT UP/DOWN button to move a red arrow pointer to
system that you want to set, and then press
SELECT button.
1
2
SYSTEM SELECT MENU (PC)
This projector automatically selects PC system among those provided
in this projector and PC system can be also selected manually.
AUTOMATIC MULTI-SCAN SYSTEM
SYSTEM SELECT Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (16 ~ 20)
set in DISPLAY ADJUST
Menu. (P31, 32)
User preset adjustment in MANUAL PC ADJUSTMENT.
Adjustment data can be stored in the Mode 1-20.
Mode 1
Computer systems provided in the projector. The
projector chooses proper system and displays it.
XGA 1
Mode 1 and XGA 1 are examples.
✽