Sanyo PLV-HD2000E Projection Television User Manual


 
32
DISPLAY ADJUST
Press SELECT button to show information of computer selected.
Current mode
Adjusts clamp position. When image has a dark bar(s), try this
adjustment.
Clamp
Press SELECT button at Current
mode icon to show information of
computer connected.
Current mode
Press SELECT button at this icon
to display previous items.
Reset
Store
Closes DISPLAY ADJUST MENU.
Quit
Other icons operates as follows.
3
To store adjustment parameters, move a red frame pointer to
Store icon and then press SELECT button. Move a red arrow
pointer to any of Mode 1 to 20 that you want to store and then
press SELECT button.
Reset all adjust parameters on adjustment dialog box to previous
figure.
Mode free
To store adjustment data.
To clear adjustment data.
To clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SELECT button. Move
a red arrow pointer to Mode that you want to clear and then
press SELECT button.
Mode free icon
Store icon
Vacant Mode
Shows values of Total dots
Display area H and Display
area V.
Terminal board and
System of input signal.
Press POINT LEFT/RIGHT
buttons to display left/right page.
Press POINT UP/DOWN buttons
to display next/previous page.
Close this
dialog box.
This Mode has parameters
being stored.
Shows values of scale and position
of Aspect H and Aspect V .