Filter
Top Products
10
SETTING THE LANGUAGE
Before using your RadioShack 8-in-1 LCD Remote, you
must set the default language (either English or
Spanish). You cannot use your remote control until you
have set the language. To set the language for your
remote control for the first time, perform the following
steps:
1. After the remote powers up, the LCD displays
English OK or .
2. Press OK for English or press until Spanish is
displayed. Press OK.
3. The LCD displays Success and returns to normal
operation.
To change the language after the initial setup, perform
the following steps:
1. Press and hold P until the LCD displays
Code Set OK or . The remote is
now in the programming mode.
2. Use the or keys to scroll through the LCD
display until Language is displayed.
3. Press OK once.
4. To set the language to English, press OK once. To set
the language to Spanish, use the to scroll to
Spanish. Press OK to select Spanish as the remote
control’s language.
5. To exit this menu, press EXIT once, or use the
key to return to the previous menu.
SETTING THE CLOCK
To set the clock on your remote control, perform the
following steps:
1. Press and hold P until the LCD displays
Code Set OK or . The remote is
now in the programming mode.
2. Use the or keys to scroll through the LCD
until Clock set is displayed.
3. Press OK once.
4. The LCD displays the time as previously set, if any.
The first set is the hour. The second set is the
minutes. In the position following the numbers,
the LCD displays A or P for A.M. or P.M.
5. While the number for the first digit is flashing, use
the or keys to select the correct digit. You can
also change the time by pressing the number keys
on your remote control’s keypad.
6. Use the key to change to the next digit, until the
last digit is set. Use to go back to the previous
digit.
7. After you have set the correct time, use the key to
cursor over to A or P.
RadioShack 8-in-1 LCD ENG.fm Page 10 Friday, February 9, 2007 6:11 PM