Filter
Top Products
24
7. The LCD displays Are u sure OK or . Press OK.
The LCD displays Success and the remote exits.
CHANGING VOLUME LOCK
The RadioShack 8-in-1 LCD Remote comes preset to
allow independent volume control of each selected
device (Global Volume Unlock). However, you may
change the Volume Lock setting to Global Volume Lock
so that one device's volume controls volume in all other
modes. After that, you can perform Individual Volume
Unlock on a selected device to set its volume control for
independent operation.
Locking Volume Control to One Mode (Global Volume
Lock)
1. Press and hold P until the LCD displays
Code Set OK or .
2. Use the or keys to scroll through the
LCD display until Vol Lock is displayed.
Press OK.
3. The LCD displays All Volume OK or . Press
OK.
4. The LCD displays Press Mode or . Press the
mode key for the device you wish to control volume
(for example, TV). The LCD displays Success and
shows the device that has been locked to control
volume (for example, TV).
Now when you press VOL+, VOL-, or MUTE, the selected
device (for example, TV) controls the volume regardless
of the current mode.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1. Press and hold P until the LCD displays
Code Set OK or .
2. Use the or keys to scroll through the
LCD display until Vol Lock is displayed. Press OK.
3. Use the use the or keys to scroll through the
LCD display until Unlock DEv is displayed. Press
OK.
4. The LCD displays Press Dev or . Press the
mode key for the device you want to unlock, for
example, AUDIO).
5. The LCD displays success and shows the device
whose volume has been unlocked (for example,
AUDIO).
6. Repeat Steps 3 to 5 for any other devices that you
want to have independent volume control.
RadioShack 8-in-1 LCD ENG.fm Page 24 Friday, February 9, 2007 6:11 PM