Filter
Top Products
L R
AUDIO
IN
7
For VCRs with Video and Left and Right Audio
connectors, you can use the Out 2 connectors (Video,
Left, and Right) on the 8300HDC.
8300HDC
Connections
VCR
Connections
When using the 8300HDC with an SDTV, you must make one of the following connections to view
content. Some SDTVs may not have all these connections. In addition, you can make connections
to a VCR to archive recordings to a VCR tape. Refer to your TV and VCR user guides and the
cabling diagrams in this guide for more detailed information.
Note: The labeling on your 8300HDC may vary slightly.
Connections for a Standard-Definition TV and VCR
The Y/V PbPr connectors can provide standard-
definition component video signals to an SDTV.
Note: To connect PrPbY/V to an SDTV, you must set
the HD Setup Wizard on the 8300HDC to HD Mode,
and select the output video format (typically 480i) that
will match the capabilities of your SDTV.
The S-Video Out connection provides an optimal video
connection to SDTVs.
8300HDC
Connections
SDTV
Connections
The Cable Out connector provides a video and audio
connection to an SDTV.
S-Video
Composite
PrPbY/V
Cable Out
L R
L R
L R
When you set up the 8300HDC in SD mode, the Y/V
connector on the 8300HDC is configured as a
composite video out connector (V).
See the connection diagram on page 19 for an
example.
VCR
Required Connections to an SDTV (use one)
Optional Connection to a VCR
VIDEO
IN
S-VIDEO
OUT
S-VIDEO
IN
VIDEO
OUT 2
L
A
U
D
I
O
R
VIDEO
IN
CABLE
OUT
CABLE IN
/
ANT IN
Pr
Pb
Y