Filter
Top Products
INDEX SEARCH
This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward
or rewind mode.
• The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting
point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL button is pressed and released during recording.
• The time gap between making the index marks on the tape should be greater than 1minute for SP recording, 2
minutes for LP recording and 3 minutes for SLP recording.
NOTES:
• VCR Power must be on.
• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
(CH 3 or 4)
• Press the TV/VCR button so that "VCR" appears on the display.
• You must use remote control for this procedure.
Example: You are watching program number 4 and want to fast forward to program number 7. You must skip
three programs.
CURRENT PLAYBACK PROGRAM
II
I P,o._I p,o.=I ,,o.3_ Pro.51P,o.eI Pro.71
4 3 2 1 1 2 3
INDEX MARK
PressINDEX SEARCH but-
ton. Index Search mode ap-
pears on the TV screen.
Press the number button cor-
responding to the number of
programs that you want to
skip.
To correct the Index num-
ber, press DELETE button
and re-enter the correct
number.
Press REWIND or F.FWD
button. The VCR begins re-
winding or fast forwarding
then goes into playback
mode at the beginning of de-
sired program.
INDIE_I_ARCH
• J' u
Note: Every time an index signal is skipped, the num-
ber in the program indicator decreases by one.
When the preset program is
reached, normal playback
will start.
Notes:
• Index search can be set up to 20.
• This function is not operative in recording mode.
• Procedures must be followed within 30 seconds,
from steps [1] to [2]. Otherwise the Index Search
mode will be cancelled.
• A video cassette must be insertedinthe VCR for this
function towork.
• Press STOP button on the VCR or remote control
unit to exit the Index Search mode.
- 24 - EN
• r_gc_r it 5B24