Filter
Top Products
1 Cassette Compartment
2 STOP/EJECT button-Press to stop the tapemo-
tion. Pressagaintoremovethetapefrom VCR.
3 PLAY button-Press tobegin playbackofa tape.
4 REW(ind) button-Press torewind thetape,or to
view videoin reversedirection at a faster thannor-
malspeed.PressPLAY button toreturn VCR tonor-
mal playback speed.
5 F.FWD button-Press to advance the tape, or to
view video in forward direction at a faster than nor-
mal speed. Press PLAY button to return VCR to nor-
mal playback speed.
6 PAUSE/STILL button- Press to temporarily stop
the tapeduring recordingor toview a still picture
during playback.
7 END button-Press to select desired end time in
the Quick Set Program mode.
8 START button-Press to select desired start time
in the Quick Set Program mode.
9 QUICK SET PROGRAM button-Press to set
theQuick SetProgram.
10 OTR button-Press to activateonetouchrecord-
ing mode.
11 REC(ord) button-Press tobeginmanualrecord-
ing.
12 CH(annel) buttons- Press to select the channel
for viewingor recording.
TRACKING function-Press • or • tominimize
video'noise' (linesordotsontheTV screen)during
tape playback.
13 SPEED button- Press to set desired tape speed.
14 Digital Display- Displays the clock, timer record-
ing, counter, channel etc.
15 Remote Sensor window-Receives the infrared
control signals from the handheld remote control
unit.
16 TV/VCR button-Press to select the signal source
that your TV will receive.
VCR position: to view playback, to monitor video
recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program
while recording another.
17 POWER button-Press to turn VCR on and off.
Press to activate the automatic timer recording.
18 AUDIO IN jack-For connection to audio output
jack of your audio equipment or another VCR. (Use
these jack when selecting the '1.,2"position, see page
13 "INPUT SELECT".)
19 VIDEO IN jack-For connection to video output
jack of your video camera or another VCR. (Use this
jack when selecting the "L2" position, see page 13
"INPUT SELECT".)
20 Power cord-Connect to a standard AC outlet
(120V/60H z).
21 AUDIO OUT jack-For connection to the audio in
jack ofyour audioequipment or anotherVCR.
22 AUDIO IN jack-For connection to theaudio out-
put jack of your audioequipment or anotherVCR.
(Use these jack when selecting the "L1"position, see
page 13 "INPUT SELECT".)
23 ANT. IN terminal-For connection to an antenna
or CATV.
24 ANT. OUT terminal-For connection to an an-
tenna in terminal of your TV.
25 CH3/CH4 selector switch-Use to select the
video output channel (3 or 4) for playback from the
VCR.
26 VIDEO IN jack-For connection to the video out-
put jack of your video camera or another VCR.(Use
this jack when selecting the '%1" position, see page
13 "INPUT SELECT".)
27 VIDEO OUT jack-For connection tothe video in
jack of videoprocessoror anotherVCR.
- 7 - EN
"k "A""lk_" * 5('16