Sharp 10P06-MX-NM Flat Panel Television User Manual


 
55
Internet Setup
Connection Type
1
Press MENU to display the MENU screen, and then
press
c
/
d
to select "Initial Setup".
2
Press
a
/
b
to select "Internet Setting", and then
press ENTER.
3
Press
a
/
b
to select "Communication Setup", and
then press ENTER.
4
Press
a
/
b
to select "Connection Type", and then
press ENTER.
5
Press
c
/
d
to select "Wired" or "Wireless", and
then press ENTER.
If you select "Wired", the signal is detected and setup
is performed automatically. Use "Ethernet Setup" to
check and change the settings as necessary. (See
page XX.)
If you select "Wireless", use "Wireless Setting" to
confi gure the access point settings.
Wireless Setting
If your access point supports Wi-Fi Protected Setup
(WPS), it is recommended that you use this function
for the wireless connection. You can press the WPS
button on the access point to confi gure the settings
automatically.
The name of the WPS button function may differ depending
on the access point. See the operation manual of the
access point for details.
1
Confi rm the current settings in "Connection Type".
If "Wired" is selected, press
c
/
d
to select "Wireless".
2
Press
a
/
b
to select "Wireless Setting", and then
press ENTER.
Confi rm the settings. If each setting item is correct,
press MENU to exit.
If you are confi guring the wireless setup for the fi rst
time or changing the settings, go to step 3.
3
Press
c
/
d
to select "Change", and then press
ENTER.
4
Press
a
/
b
to select "WPS", and then press
ENTER.
To select and register an access point manually, select
"Find", make the necessary settings, and then select
"Manual Setup". Follow the on-screen instructions.
5
Press
c
/
d
to select "Push button", and then press
ENTER.
To confi gure the setting manually, select "PIN code".
Follow the on-screen instructions and the operation
manual of the access point to confi gure the settings.
6
Select "Next" to complete the settings.
The connection process starts and the WPS button on
the access point can be pressed.
7
Press the WPS button on the access point.
Pressing the WPS button displays a confi rmation
screen. Please wait until a connection is established.
8
When a connection is established, the connection
details are displayed. Press ENTER.
Interactive Service
If you do not want other people to connect to the
Internet in your absence, you can make settings to
keep the TV away from the Internet.
1
Press MENU to display the MENU screen, and then
press
c
/
d
to select “Initial Setup”.
2
Press
a
/
b
to select “Internet Setting”, and then
press ENTER.
3
Press
a
/
b
to select “Interactive Service”, and then
press ENTER.
Input the 4-digit secret number by using
0
-
9
.
4
Press
c
/
d
to select “No”, and then press ENTER.
If you want to allow Internet connection, select “Yes”,
and then press
ENTER
.
5
Press MENU to exit.
Checking Your Internet Connection
Press AQUOS NET twice or three times to switch to
the TV+Web or Web screen.
When the original home page appears, now you are
connected to the Internet.
If you have failed to connect to the Internet in the above
operation, then an error message will appear. In this case,
press EXIT to return to the normal TV screen and check
the relevant settings (see page 51).
If you still cannot connect to the Internet, please consult
your Internet service provider or telephone company.
Using the Internet