Sharp 60LE847U Flat Panel Television User Manual


 
65
Command table
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND
PARAMETER
CONTROL CONTENTS
POWER ON COMMAND SETTING
POWER SETTING
The Power On command rejected.
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the
signal type. The ranges can be seen on the position-setting screen.
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input.
[AV] Only available when 1080i/p is being input.
9: Only available when 720p is being input.
10, 11: Available when USB-Video, DLNA-Video or Internet application is used.
(Toggle)
0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME,
4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC,
8: x.v.Color
(For LC-80LE844U/LC-70LE847U/LC-60LE847U)
,
14: STANDARD (3D), 15: MOVIE (3D),
16: GAME (3D), 100: AUTO
Volume (0–60)
Only PC mode. (0–180)
Only PC mode. (0–40)
0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]
3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]
6: Zoom [PC], 7: Stretch [PC],
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]
10:
Auto [USB-Video, DLNA-Video or Internet applications],
11:
Original [USB-Video, DLNA-Video or Internet applications]
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
If it is not TV display, it will input-switch to TV. (same function as CHU)
If it is not TV display, it will input-switch to TV. (same function as CHV)
Toggle operation of a closed caption.
0: (Toggle), 1: Normal, 2: Off, 4: 3D Hall, 5: 3D Movie,
6: 3D Standard, 7: 3D Stadium
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
The channel number of TV
The channel number of TV +1
The channel number of TV
1
(Toggle)
(1–135)
RSPW
ITGD
ITVD
IAVD
INPUT SELECTION TOGGLE
AV MODE SELECTION
VOLUME
POSITION
VIEW MODE
SURROUND
SLEEP TIMER
CHANNEL
CC
DIRECT
(ANALOG)
(DIGITAL)
CH UP
CH DOWN
CHANNEL
H-POSITIONH-POSITION
V-POSITION
CLOCK
PHASE
AVMD
VOLM
HPOS
VPOS
CLCK
PHSE
ACSU
OFTM
DCCH
CHUP
CHDW
CLCP
WIDE
0
x
0
*
***
*
*
*
*
*
*
*
*
x
x
x
**
*
_
_
_
_
_
*
*
*
*
*
_
_
_
_
*
_
_
_
_
_
_
*
*
*
_
_
_
_
_
_
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)(0100-9999)
(1-999)
(0-999)
(0-9999)
(0-6383)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
DIRECT
CHANNEL
DA2P** **
DC2U* * *_
DC2L* * *_
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DC10* * **
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
DC11* * **
_
_
_
The device name set in "IP Control Setup" is displayed.
DEVICE NAME
TVNM1___
The model name of the TV
MODEL NAME
MNRD1_ __
The current version of the TV software is displayed.
SOFTWARE VERSION
SWVN1___
The currently supported version of IP protocol is displayed.
IP PROTOCOL VERSION
IPPV1___
_
(Toggle)
AUDIO SELECTION
ACHAx___
_
0: (Toggle), 1: On, 2: Off
MUTE
MUTE * ___
_
_
_
_
__
_
_Off
The Power On command accepted.1 _ _ _ On [RS-232C]
The Power On command accepted.
When the power is in standby mode, commands also go to waiting status
and so power consumption is just about the same as usual. With the
commands in waiting status, the Center Icon Illumination on the front of the
TV lights up.
2 _ _ _ On [IP]
Power On1 _ _ _ Power On
It shifts to standby.P O W R 0 _ _ _ Power Off
_
_
_
_
TV
1-8
3D
0: 3D Off
1: 2D3D
2: SBS
3: TAB
4: 3D2D (SBS)
5: 3D2D (TAB)
6: 3D auto
7: 2D auto
TDCH*___
1: HDMI 1, 2: HDMI 2, 3: HDMI 3, 4: HDMI 4,
5: COMPONENT, 6: VIDEO 1, 7: VIDEO 2, 8: PC
REMOTE CONTROL BUTTONS
R C K Y * * _ _ 0-9: 0-9, 10: DOT, 11: ENT, 12: POWER, 13: DISPLAY,
14: POWER (SOURCE) 15:
*, 16: ,, 17: -,
18:
), 19: ., 20: +, 21: /, 22:
(
REC,
23: OPTION, 24: SLEEP, 27: CC, 28: AV MODE,
29: VIEW MODE, 30: FLASHBACK, 31: MUTE,
32: VOL -, 33: VOL +, 34: CH
U, 35: CH V,
36: INPUT, 38: MENU, 39: SmartCentral, 40: ENTER,
41: a, 42: b, 43: c, 44: d, 45: RETURN, 46: EXIT,
47: FAVORITE CH, 48: 3D Surround, 49: AUDIO,
50: A (red), 51: B (green), 52: C (blue), 53: D (yellow),
54: FREEZE, 55: FAV APP 1, 56: FAV APP 2,
57: FAV APP 3, 58: 3D, 59: NETFLIX
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• Any numerical value can replace the “x” on the table.
Using a PC