Filter
Top Products
TV
INPUT1
INPUT2
DVD
INPUT4
28
Input Label
You can assign each input source a label you like.
Useful adjustment settings
Repeat the above until the name is fully spelt
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
(Example)
NOTE
• You cannot change labels if the input source is TV.
6
Image position
For adjusting a picture's horizontal and vertical
position.
Press TV/VIDEO to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Input Label”, and then
press ENTER.
4
Press
a
/
b
to select characters and
c
/
d
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c
/
d
to move to “CLEAR” on the “Input Label”
screen, and then press ENTER.
5
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Position”, and then
press ENTER.
3
Press
a
/
b
to select “H-Pos.” or “V-Pos.”.
4
Press
c
/
d
to adjust the item to your desired
position.
5
Reset
H-Pos. [0] +
V-Pos. [0]
+
Selected item
H-Pos.
V-Pos.
Description
Centres the image by moving it to the left
or right.
Centres the image by moving it up or
down.
NOTE
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, and then press
ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or input signals.
PX5X_en_f.indd 28PX5X_en_f.indd 28 2006/11/30 16:50:312006/11/30 16:50:31