Sharp LC-42PX5X Flat Panel Television User Manual


 
ANALOG RGB
AUDIO
45
Displaying an image from a PC
To view an image from a PC, select “PC” using TV/
VIDEO on the remote control unit or TV/VIDEO on the
TV.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 36.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
PC
Viewing an image from a PC
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
Using external equipment
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 46 for a list of PC signals compatible with the TV.
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Signal names for 15-pin mini D-sub connector
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No.
5
is not used for inputting the signal.
15
14
13
12
9
11
10
8
7
6
5
4 3
2
1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
R GND (Ground) Not connected
G GND (Ground) SDA
B GND (Ground) HD
Not connected +5V VD
CSYNC GND (Ground) SCL
PX5X_en_j.indd 45PX5X_en_j.indd 45 2006/11/30 16:51:372006/11/30 16:51:37