Filter
Top Products
46
Troubleshooting
Possible Solution
Appendix
Problem
• No power.
• Unit cannot be operated.
• Remote control unit does not
operate.
• Picture is cut off.
• Strange colour, light colour, or
dark, or colour misalignment.
• Power is suddenly turned off.
• No picture.
• No sound.
• Check if you pressed POWER on the remote control unit. (See page 13.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected? (See page 7.)
• Has the power been turned on? (See page 13.)
• External infl uences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after fi rst turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Are batteries inserted with polarity (
e
,
f
) aligned? (See page 5.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fl uorescent lighting?
• Is a fl uorescent light illuminated to remote control sensor?
• Is the image position correct? (See page 28.)
• Are screen mode adjustments such as picture size made correctly? (See pages 29
to 31.)
• Adjust the picture tone. (See pages 23 to 25 and 33.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 19 and 34.)
• Check the input signal setting. (See page 33.)
• The unit's internal temperature has increased.
Remove any objects blocking vent or clean.
• Check the power control setting. (See page 35.)
• Is sleep timer set? (See page 15.)
• Is connection to other equipment correct? (See pages 42 to 45)
• Has input signal setup been done correctly after connection? (See page 33.)
• Is the correct input selected? (See page 33.)
• Is picture adjustment correct? (See pages 23 to 25.)
• Is the antenna connected properly? (See page 8.)
• Is “On” selected in “Audio Only”? (See page 33.)
• Is the volume too low? (See page 15.)
PC compatibility chart
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
f
20°C to
e
60°C.
✓
✓
✓
✓
✓
✓
✓
✓
✓
VGA
Resolution
VESA
Standard
60 Hz
72 Hz
75 Hz
85 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
31.5 kHz
37.9 kHz
37.5 kHz
43.3 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
53.7 kHz
640
g
480
640
g
480
640
g
480
640
g
480
800
g
600
800
g
600
800
g
600
800
g
600
800
g
600
Vertical
Frequency
Horizontal
Frequency
SVGA
✓
✓
✓
✓
✓
XGA
Resolution
VESA
Standard
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
48.4 kHz
56.5 kHz
60.0 kHz
47.8 kHz
47.7 kHz
1024
g
768
1024
g
768
1024
g
768
1280
g
768
1360
g
768
Vertical
Frequency
Horizontal
Frequency
WXGA
PX5X_en_j.indd 46PX5X_en_j.indd 46 2006/11/30 16:51:372006/11/30 16:51:37