Filter
Top Products
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
• Power control menu displays.
2
Press
a
/
b
to select “Power Control”, and
then press ENTER.
3
Press
a
/
b
to select “No Signal Off”, and then
press ENTER.
4
Press
a
/
b
to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
5
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
• Power control menu displays.
2
Press
a
/
b
to select “Power Control”, and
then press ENTER.
3
Press
a
/
b
to select “No Operation Off”, and
then press ENTER.
4
Press
a
/
b
to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
5
NOTE
• “Disable” is factory preset value.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
• Power control menu displays.
2
Press
a
/
b
to select “Power Control”, and
then press ENTER.
3
Press
a
/
b
to select “Power Management”,
and then press ENTER.
4
Press
a
/
b
to select “Mode1” or “Mode2”,
and then press ENTER.
5
Power Control for PC source
Power Management
When set, the power will automatically shut down if no
signal is input for a certain time.
Off
Mode1
Mode2
35
NOTE
• If you turn off the power by disconnecting AC cord when
setting “Mode2” in power management, the TV may not
function properly after turning the power on again. In such
case, press POWER on the remote control unit.
• Pressing POWER on the display will have the same result.
Useful adjustment settings
Power Control
Power Control setting allows you to save energy.
No Operation Off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
NOTE
• “Disable” is factory preset value.
• When a TV programme fi nishes, and the TV receives signal
input, this function may not operate.
Power Control for AV source
No Signal Off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Selected item
Off
Mode1
Mode2
Description
• No power management
• Factory preset value.
• If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 13.)
• If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 13.)
PX5X_en_g.indd 35PX5X_en_g.indd 35 2006/11/30 16:50:492006/11/30 16:50:49