Filter
Top Products
18
Option
Fixed
Auto
Audio Only
Icon Light Up Setting
Output Select
Color System
Caption Setup
Favorite CH
Fine Sync.
Identification
Software Update
4
Example
1
Item displayed in light blue
• This indicates the item currently selected.
2
This indicates the current setting for the item.
3
Item displayed in white
• This indicates that the item can be selected.
4
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
—Nothing is connected to the selected input terminal.
—The function is not compatible with the current input
signal.
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
• The order of explanations for each menu item in the
following pages is not necessarily in accordance with the
alignment of the items on the screen.
STANDARD
Picture
On:Display
OPC
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
7
30
0
4
0
2
Example
RETURN
EXIT ENTER
The bar above is an operational guide for
the remote control. The icon of the button
operated by the remote control will turn white.
1
Press MENU to display the MENU screen.
2
1
Press
c
/
d
to select the desired menu.
2
Press
a
/
b
to select a specifi c adjustment item.
3
Press
c
/
d
(or
a
/
b
) to select or adjust the
desired setting, and then press ENTER.
3
Press MENU to exit.
On-Screen Display Menu
On-Screen Display Menu Operation
Menu Operation Buttons
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
Using the remote control
Use the following buttons on the remote control to
operate the menu.
MENU: Press to open or close the menu screen.
a
/
b
/
c
/
d
: Press to select a desired item on the screen or
adjust a selected item.
ENTER: Press to confi rm the settings of Reset.
RETURN: Press to return to the previous step.
MENU: MENU on the
remote control.
INPUT: ENTER on the
remote control.
CH
U
/
V
: Cursor
a
/
b
on the remote
control.
VOL
k
/
l
: Cursor
c
/
d
on the remote
control.