Sharp LC-70LE600U Flat Panel Television User Manual


 
7
Attaching the Stand
• Before attaching the stand, make sure to turn off the TV
and unplug the AC cord.
• Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.
CAUTION
Attach the stand in the correct direction.
Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the
TV.
1
Confi rm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2
1
Set the post for the stand unit onto the
polystyrene foam.
2
Attach the base to the post.
3
Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
• Hold the stand unit securely with one hand, and then
tighten the screws.
FRONT
2
3
1
1
Long
screws
3
1
Insert the stand into the openings on the bottom
of the TV.
• Make sure that the stand is fi rmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
2
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
1
1
2
2
Soft cushion
Short screws
QUICK REFERENCE
Removing the Stand
• Before detaching the stand, make sure to turn off the TV
and unplug the AC cord.
CAUTION
Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
1
Unfasten the four screws used to secure the stand
in place.
2
Detach the stand from the TV.
• In the installation procedure, be careful not to catch your
fi ngers between the TV set and the fl oor.