Sharp LC-70LE600U Flat Panel Television User Manual


 
21
Setup Menu
Example
Setup
HDMI1
Disable
PCM
English
EZ Setup
CH Setup
Input Label
Parental CTRL
PC Audio Select
HDMI Auto View
Audio Setup
Language
Reset
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifi es
for ENERGY STAR in Home mode default setting.
Home: AV Mode is set to "STANDARD".
Store: AV Mode is set to "DYNAMIC (Fixed)".
• ENERGY STAR qualifi cation is based on AV Mode
"STANDARD".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
• See Initial Installation on page 13 for setting each item.
• If no channel is found, confi rm the type of connection made
with your TV and try "EZ Setup" again.
CH Setup
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip.
Show/Hide: Removes the checkmarks to let the channels be
skipped.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
• See Initial Installation on page 13 for setting each item.
• If no channel is found, confi rm the type of connection made
with your TV and try channel search again.
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
c
/
d
to select the new name for the input mode.
Setting the Names to Your Preference
1
Press
c
/
d
to select "Custom".
2
Press
a
/
b
to enter the desired characters.
• You can use alphanumeric characters (including spaces
or some symbols) to set the name to your preference.
• If you press
b
when "Default" is selected, the "Custom"
setting display appears.
PC Audio Select
Determines whether the AUDIO input terminal is used
for PC IN or HDMI 1.
HDMI1: Select this item when the audio signal is input
via the HDMI 1 terminal using a DVI-HDMI conversion
cable.
PC IN: Select this item when the audio signal is input via
the PC IN terminal using an analog RGB cable (D-sub
15-pin cable or VGA cable).
• When "PC Audio Select" is set to "HDMI1", sound will not
be produced if you use only an HDMI-certifi ed cable to
connect HDMI-compatible equipment. To produce sound,
you should make an analog audio connection.
• If you want to connect HDMI-compatible equipment using
only an HDMI-certifi ed cable, set "PC Audio Select" to
"PC IN".
HDMI Auto View
To watch an HDMI or PC-IN equipment image, select
"HDMI1", "HDMI2" or "HDMI3" from the INPUT SOURCE
menu using INPUT on the remote control unit or on
the TV.
Enable: To use View Mode based on signal recognition,
including an HDMI signal.
Disable: No function.
• Refer to your external equipment operation manual for the
signal type.
• When connecting a DVI-HDMI conversion adapter/cable to
the HDMI terminal, the image may not come in clearly.
Audio Setup
You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
On-Screen Display Menu