44
Enjoying 3D Image Viewing
3D Glasses
Supplied Accessories for 3D Glasses
Make sure the following accessories are provided with the 3D Glasses. Two sets of 3D Glasses are provided.
3D Glasses
(×2)
Pages 44 to 48
Nose pad *1
(small ×2, large ×2)
Page 45
USB cable*2
(×2)
Page 45
Glasses case
(×2)
Cleaning cloth
(×2)
*1 Use the 3D Glasses nose pad as needed. The small nose pad is already attached.
*2 The supplied USB cable is a dedicated cable for the 3D Glasses. It does not operate when connecting with other USB
devices.
Use the supplied USB cable for recharging. When power is supplied to the glasses, use a commercially available USB cable.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
Part Names
1
2
3
4
5
1 Infrared receiver
Receives an infrared signal sent from the TV. The
3D Glasses turn off automatically after 10 minutes
if no signal is received from the TV.
2 USB terminal
This terminal is for recharging and supplying power.
3 3D/2D/OFF switch
This button switches between 2D, 3D and OFF
modes.
4 LED light
Blinks once every second when the battery power
is low.
5 Nose pad mount
The dedicated nose pad can be mounted here.
• Do not soil or apply stickers or block the infrared receiver.
Doing so may block signals from the TV and prevent the
3D Glasses from working correctly.
• Interference from other infrared communications equipment
may prevent you from viewing 3D images correctly.