Filter
Top Products
21
Watching TV
Display
AVC System
POWER button
MODE
AV
TV
ANT-A/B
INPUT
TWIN
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
ENT
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
Virtual
Turning on the power
STANDBY/ON indicatorMAIN
POWER
MAIN POWER
Off
Flashing red
Red
Green
Display status indicator
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System is on.
AVC System status indicator
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System is on.
Off
Red
Green
POWER indicator
1
2
3
Press MAIN POWER on the Display.
• The POWER indicator on the Display flashes red.
Press MAIN POWER on the AVC System.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
• If the STANDBY/ON indicator on the AVC System and the POWER
indicator on the Display still light up red, press TV POWER on
the remote control unit or MAIN POWER on the AVC System to
turn the System on.
First time turning on the AVC System
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
1
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
• If the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display still light up red, press TV
POWER on the remote control unit or POWER button on the
Display to turn the System on.
NOTE
• The initial setup starts when the System powers on for the first time. If the
System has been turned on before, the EZ setup will not be invoked. See
page 27 to try EZ setup from the Setup menu.
Turning off the power
1
2
Press TV POWER on the remote control unit or
POWER button on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display change from green to red.
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the POWER indicator on the Display flashes red.
Press MAIN POWER on the Display.
• The POWER indicator on the Display gradually turns off.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.