Sharp LC 30HV6U Flat Panel Television User Manual


 
8
Setting the System in place
Handling the Display
CAUTION
When using the TV with the supplied stand attached, do not
remove the speaker. Doing so may disturb the balance
leading to product damage or personal injury.
Do not remove the stand and speaker from the Display unless
using an optional bracket to mount it.
Keep enough space above and behind the Display.
The Display is heavy. Move it with two or more people.
When you move the Display, hold the portion of the Display, not
the speaker.
Handling the AVC System
CAUTION
Do not put a VCR or other device on the AVC System.
Keep enough space above and on the sides of the AVC System.
Do not block the ventilation openings on the top and left side,
and the exhaust fan on the right side.
Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
Selecting the location of the System
Select a place with no direct sunlight and good ventilation.
The Display and the AVC System are connected by the system cable.
(See page 9 for details.)
Keep enough space
System cable
AVC System
Display
There is an
exhaust fan on
the right side.
1
2
4 inches
(10 cm)
or more
2 inches
(5 cm) or more
2 inches
(5 cm) or
more
Preparation
If you want to keep a longer distance between the Display and AVC
System, please purchase the optional system cable AN-07SC1
(about 23 feet/7 meters). (See page 81.)
IMPORTANT
You cannot use external speakers when you are using the optional
system cable (AN-07SC1).
CAUTION
Adjust the screen with both
hands. Put one hand on the
Display and tilt the screen
while steadying the stand
with your other hand.
You can adjust the screen
vertically up to 4 degrees
forward or 6 degrees back-
ward, or rotate 10 degrees
horizontally.