Filter
Top Products
23
Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
NOTE
• While watching a broadcast, press ANT-A/B to view the
image received from the other tuner.
■ Using CHa/b on the remote control unit
• Press CH
aa
aa
a to increase the channel number.
• Press CH
bb
bb
b to decrease the channel number.
NOTE
• CH s/r on the Display operates the same as CH
aa
aa
a/
bb
bb
b
on the remote control unit.
■ Changing channels with CH a/b on the
remote control unit or CH s/r on the
Display
Air: Press CH a and the channel change in the
order shown below:
2s3s...s68s69s2s3...
Press CH b and the channel change in the order
shown below:
3s2s69s68s...s3s2...
Cable:Press CH a and the channel change in the
order shown below:
1s2s3s...s125s1s2s3...
Press CH b and the channel change in the order
shown below:
3s2s1s125s...s3s2s1s...
■ Using 0 – 9 and 100 on the remote control
unit
Select the channels directly by pressing buttons 0 to
9 and 100.
• The System allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2 or 3-digit
number.
NOTE
• When selecting a 1-digit channel number, do not fail to
press the 0 button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following steps within 3 seconds.
–0
5
Display
CH s/r
a
To select a 1 or 2-digit channel number
(e.g., Channel 5):
Complete the following steps within 3 seconds.
1
1
2
Press the 0 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 5 button.
■ Using FLASHBACK on the remote control
unit
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel.
Press FLASHBACK again to switch back to the
currently tuned channel.
NOTE
• FLASHBACK will not work if no channel has been
changed after the System is turned on.
–
–
–1
11
115
3
2
Press the 100 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 1 button.
• Complete the step 3 within 3 seconds after the
step 2.
Press the 5 button.
TV
ANT-A/B
INPUT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VOL CH
MUTE
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
Virtual
NOTE
• The 100 button is only enabled when selecting channels
in Cable mode.