Filter
Top Products
22
Watching TV
Press a/b to select the desired language
listed on the screen, and then press SET/
ENTER.
Press c/d to select “Air” or “Cable” for ANT-
A, then press a/b to move down.
Press c/d to select “Air” or “Cable” for ANT-
B.
Press SET/ENTER to enter the setting.
• This operation makes the System search for
both ANT-A and B.
Initial setup
When you turn on the System for the first time, it will automatically memorize the broadcasting channels where
you live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 13.)
2. Connect the antenna cable to the AVC System. (See pages 17 to 19.)
3. Plug in the AC cord to the AC outlet. (See page 20.)
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
3
1
2
English
Español
Français
ANT-A Air
ANT-B
Cable
Air Cable
CH Search
ANT-A [ ]2Air
CH Search
ANT-B [ ]2Cable
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
VOL
INFO
ANT-A Air
ANT-B
Cable
Air Cable
Example
2
ANT-A
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
NOTE
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
Example
NOTE
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
• If no channel is found, make sure what kind of connection
is made with your System and try EZ setup again (see
page 27).
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly
from the actual operations.