Filter
Top Products
18
www.sharp.co.uk/support
BASIC OPERATION
HOW TO USE THE VIDEO Plus+
®
SYSTEM TO MAKE A
RECORDING
6. If you wish to change the RECORDING
SPEED
, use the [/]to highlight SP. Press
[ / ] to select standard play (SP), long
play (LP) or extended play (EP) as required.
7. (See NOTE below). For VPS/PDC setting use
the
[/] to highlight the final column. Using
the [ / ]
will select VPS/PDC ON or
OFF. (✱ = ON - = OFF).
8. Press the SET button to confirm the
programme. The VIDEO Plus+ system menu will
reappear. If you wish to enter further
VIDEO Plus+ system recordings repeat this
procedure.
9. When you have completed entering the timer
settings, press the
MENU button to
remove the menu from the TV screen.
10. Ensure that the tape on which you wish to
record is inserted into the VCR, then press the
TIMER ON/OFF
button once to place
the VCR in TIMER STANDBY mode.
will be
shown on the display.
NOTES:
• You may also access the VIDEO Plus+ system menu by the following procedure:
i. Press the MENU button.
ii. The VIDEO Plus+ system option will be highlighted. Press the SET button to
confirm.
Continue from step 2 of this procedure.
• VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
• If the symbol flashes a video tape has not been inserted into the VCR.
• If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
• During recording, press
STOP to cancel the recording. If there are further
recordings to be made, the VCR will return to Timer Standby.
1/2
DATE PR START STOP
21/060212:0013:00SP*
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
SP / LP /
EP: T
APE SP
EED
ǡǠ :SELECT įĬ : CHANGE
SET : ENTER MENU: EX I T
1/2
DATE PR START STOP
21/060212:0013:00SP-
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
VPS/PDC ✱ :ON - :OFF
ǡǠ :SELECT įĬ : CHANGE
SET : ENTER MENU: EX I T
6.
7.
→
PLUSCODE NO . -
ONCE WE E KL Y D A I L Y
8.
SET
SET
TINS-A082UMN1.book Page 18 Monday, November 4, 2002 2:33 PM