Filter
Top Products
19
www.sharp.co.uk/support
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
You can make a maximum of eight delayed recordings up to a year in advance.
The example shown is for 24-hour clock operation. To change to12-hour clock operation refer
to the
MANUALLY SETTING THE CLOCK section of this manual.
12-hour clock am/pm can be selected using the
AM/PM button on the remote
control.
Before you start!
• If the Timer Standby symbol appears on the VCR display, press the TIMER
ON/OFF button to remove the symbol.
• Check that the VCR clock is displaying the correct time.
SETTING A RECORDING
For example: Recording a programme on channel 3 from 21:05 to 22:30 on July 9th.
1. Press STOP to ensure that the VCR
is switched on.
2. Press the MENU button.
3. Press the[ / ] menu select buttons to
select
TIMER. Press the SET button to
confirm.
4. Press the SET button again, the on-screen
display will now show today’s date.
If you wish to change the date use the
[ / ]or
NUMBER BUTTONS. If you
use the number buttons, enter two digits for
the day, then two for the month. For example
for July 9th, press
0 9 (9th), then 0 7 (July).
When the correct date for your recording is
shown, press the
menu select button to
move to the next setting.
5. If you want to make additional recordings at
the same time each day or week, use the
[ / ] buttons to select D (daily) or W
(weekly). Then press to move to the next
setting.
6. Enter the channel number using the
[ / ]or the
NUMBER BUTTONS. For
example to record a programme on channel
3, press 0 3. Then press to move to the next
setting.
See next page to continue
MENU SCREEN
MENU
V I DEOPLUS+
TIMER
MODE
SET UP
1/2
DATE PR START STOP
21/060212:0013:00SP*
9/07D -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
REMOTE CONTROL
1/2
DATE PR START STOP
21/060212:0013:00SP*
9/07 -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
3.
4.
5.
MENU
SELECT
BUTTONS
VIDEO
Plus+
SET
SET
TINS-A082UMN1.book Page 19 Monday, November 4, 2002 2:33 PM