Filter
Top Products
15
XL-DV60
Preparation for Use
" FM/AM loop antenna connection
Connect the FM/AM loop antenna to the ANTENNA jack.
Position the FM antenna wire and rotate the AM loop antenna for
optimum reception. Place the AM loop antenna on a shelf, or attach
it to a stand or a wall.
Notes:
! Placing the antenna on the stereo system or near the AC power
cord may cause noise pickup. Place the antenna away from the
stereo system for better reception.
! Do not connect the attached FM antenna to an external antenna
as this may cause trouble.
Installing the AM loop antenna:
" Speaker connection
Insert the front speaker plugs (black) into the FRONT terminals.
Insert the subwoofer plug (red) into the SUBWOOFER terminal.
Caution:
" Front speaker grills are removable
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
! The supplied speakers are exclusively for the XL-DV60. Do
not connect them to other equipment, and do not connect
other speakers to the XL-DV60. It may cause malfunction.
! Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
! Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
! Do not allow any objects to fall into or to be placed in the bass re-
flex ducts of the speakers.
! Do not stand or sit on the speakers. You may be injured.
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
Front speaker
(left)
Speaker or subwoofer plug in with the rising
side facing to the right.
Black
Red
Front speaker
(right)
Subwoofer