Filter
Top Products
16
XL-DV60
Preparation for Use
System connections (continued)
" Placing the speaker system
Notes:
! Place the TV halfway between the front speakers.
! The bass sound from the subwoofer is omni-directional, however,
it is recommended to place it as close as left and right speakers.
! Place the subwoofer on a sturdy and stable surface as it tends to
vibrate while reproducing bass sounds.
! Keep the free space of at least 4" (10 cm) along the right side of
the subwoofer.
" Magnetically shielded speakers
The speakers are magnetically shielded.
Therefore, they do not affect the display even if you use them near
the TV. However, some color variation may occur, depending on the
type of TV used.
If color variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the color variation is still present...
Move the speakers further away from the TV.
If any kind of magnet or an electromagnet is placed too close to the
TV and the system, irregular colors may appear on the TV screen.
" TV connection
Three types of jacks (VIDEO OUT, S-VIDEO OUT and COMPO-
NENT VIDEO OUT) are available for connection of a TV and this
unit. Connect according to your TV.
Connecting to a TV with a video input jack:
You can enjoy DVD images by connecting your TV and this unit with
the supplied video cable.
Front speaker
(left)
Subwoofer
Same distance
Front speaker
(right)
Set the video mode to "Interlace" (default setting). For the proce-
dure, refer to "Changing the video mode" on page 17.
Notes:
! Change the TV input in accordance with the connected jack.
! Do not connect other equipment (VCR, etc.) between the TV
and this unit. Pictures may be distorted.
! Refer to the operation manual of the equipment to be connect-
ed.
! Insert the plugs fully to avoid fuzzy pictures or noise.
TV
To video
input jack
Video signal
Video cable
(supplied)