Filter
Top Products
Chapter 2 —Getting Started
7
SUR-20 touch screen buttons
The touch screen buttons enable you to operate the SUR-20.
Use these buttons to program codes from your existing
remotes, control your devices and set up command
sequences called macros. You will hear a beep when you
press a button. To activate or deactivate the beep, press any
device button twice. (For more info see Chpt. 8) The SUR-20
will turn itself off 20 minutes after the last use.
* Note:
To prevent accidental activation, the record button has a three
second safety delay. To instruct any device to record, you must press and
hold the REC button for three seconds.
Special function keys
LEARN - DELETE - MACRO -TRANS:
These four buttons activate program
modes that enable the SUR-20 to
perform advanced functions.
TRANS button used only with optional
link cable - see Appendix A.
Control buttons:
After programming, these buttons
operate devices in your home. The
LCD shows a different set of control
buttons for each device. These buttons
control functions such as: volume, play,
power off/on and more for your VCRs,
DVDs, TVs, etc… *
Device buttons:
These eight buttons select the device
you want to use. After pressing a
device button, a corresponding set of
control buttons will appear. An icon
indicates which device is active. In the
figure at left, TV is selected.