Filter
Top Products
12
Chapter 4
Chapter 4Chapter 4
Chapter 4
The Learning function
Overview: In this chapter you will learn how to teach
the SUR-20 codes used by your other remote controls.
The SUR-20 has the ability to learn how to operate any
infra-red controlled device.
Before you use the learning function
Before you start using the SUR-20’s learning function,
please heed the following precautions:
• Teach only one remote for each device screen. For example,
don’t assign some of the buttons on the TV device screen to
operate a TV in the living room, while assigning others to operate
a different TV in the bedroom. Tip: the AUX device screen can
be used to duplicate any other device screen (see AUX device
button -Chpt. 3).
• To change from a device that has already been programmed,
delete all of the commands for the first device before teaching
new ones. For example, to operate the living room TV instead of
the bedroom TV, delete all commands for the bedroom TV first.
(See Using the delete function in Chpt. 6.) Then re-configure the
TV device screen for the living room TV. (See Using the Learn
function - Chpt. 4)
• When using the learning function, you must press each button
within 2 minutes of pressing the last button. Otherwise, the SUR-
20 will exit the learning mode and return to its normal operation
mode.