Filter
Top Products
The SUR-20 User’s Manual
42
Troubleshooting Guide (Cont.)
Macro does not
work
• Be sure to aim SUR-20 at devices while macro
commands are being sent.
• Macro was not properly set up. Repeat macro
set-up procedure ( Chpt. 7).
Record button
does not work
• Record button has a three-second safety delay
to prevent accidental recording. Press and
hold REC button for three seconds.
A button performs
its function two or
more times
• Some remotes issue multiple commands when
a button is held down. Re-teach the button
being sure to release the button on your
existing remote quickly when teaching the
SUR-20.
The LCD screen
turns off.
• The SUR-20 is preset at the factory to
automatically switch the LCD off after 20
minutes if left unused. Just tap the LCD
screen to turn the SUR-20 back on again.
See our web site www.simacorp.com for more
information. Or call Sima at 800-345-7462