Filter
Top Products
Chapter 5 - Loading Pre-programmed Codes
19
You will hear 2 beeps
and then see the digital
pad screen shown in
diagram at right.
Enter a number from
the manufacturers’
code table that you
think will operate your
device. Manufacturer
code tables are found
on pages 20 - 25.
1
After entering the code,
you will hear 3 beeps
immediately, then see a
set of control buttons
corresponding to the
manufacturer’s device
you have selected.
If these controls do not
work, you may have to
enter another code from
the code table. Some
manufacturers have
several codes for their
products. Repeat the
previous steps using
another code number.
1