Filter
Top Products
25
Hookups and Settings
1 Connect the 7.1 channel jacks of the
player and your AV amplifier
(receiver).
2 Set “Audio Output Priority” to “Multi
Channel Analogue” in the “Audio
Settings” setup (page 54).
3 Make the appropriate settings in
“Speaker Settings” under the “Audio
Settings” setup (page 54).
If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.
* See “Hooking Up the Player” on page 15.
Connecting to audio L/R jacks
AV amplifier (receiver)
Audio/video cable*
: Signal flow
Blu-ray Disc/DVD player
(white)(red)
(white)(red)
Match the colour of the plug
to that of the jack.