Filter
Top Products
62
GB
• When connecting the HDMI OUT jack and the video
output jack at the same time, select [Video].
• If no picture appears when setting [HDMI]
resolution, select [Video].
x [BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of
external device, and switches to the matching
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Select this when connecting to a device
with an HDCP-compliant DVI jack.
x [HDMI Deep Colour Output]
[Auto]: Normally select this.
[16bit], [12bit], [10bit]: Outputs 16bit/12bit/
10bit video signals when the connected TV is
compatible with Deep Colour.
[Off]: Select this when the picture is unstable or
colors appear unnatural.
x [Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)
[Auto]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[Frame]: The picture, including subjects that do
not move dynamically, is output in high
resolution.
[Audio Settings]
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only.
x [DTS Neo:6]
Simulates multi-channel surround sound from 2
channel sources according to the capability of
the connected device, and outputs the sound via
the HDMI OUT jack.
[Cinema]: Outputs simulated multi-channel
sound from 2 channel sources using DTS Neo:6
Cinema mode.
[Music]: Outputs simulated multi-channel
sound from 2 channel sources using DTS Neo:6
Music mode.
[Off]
: Outputs sound with its original number of
channels.
x [Audio DRC]
You can compress the dynamic range of the
sound track.
[Auto]
: Performs playback at the dynamic range
specified by the disc (BD-ROM only).
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
[Off]: No compression of dynamic range.
x [Audio Output]
You can select the output method where the
audio signal is output.
[Speaker]: Outputs sound from the system’s
speakers only.
[Speaker + HDMI]
: Outputs sound from the
system’s speakers and 2-channel linear PCM
signals from the HDMI OUT jack.
[HDMI]: Outputs sound from the HDMI OUT
jack only. Sound format depends on the
connected component.