Filter
Top Products
52
US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\080OTH.fm
masterpage: Left
x[Relocation]
You can correct the speaker position
virtually to improve the surround effect.
[On]: You can hear sound from a virtually
relocated speaker position determined by
[Auto Calibration].
[Off]
: You can hear sound from the actual
speaker position.
• This setting is only reflected after performing
[Auto Calibration].
• You cannot select this function when the
speaker layout is set to [All Front].
x[Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]
: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each
speaker in sequence while adjusting level.
When you select one of the [Speaker
Settings] items, the test tone is emitted
from each speaker in sequence.
Adjust the sound level as follows.
1 Set [Test Tone] to [On].
2 Press V/v to select [Level], then
press .
3 Press V/v to select the speaker type
you want, then press .
4 Press B/b to select the left or right
speaker, then press V/v to adjust the
level.
5 Press .
6 Repeat Steps 3 to 5.
7 Press RETURN.
The system returns to the previous
display.
8 Press V/v to select [Test Tone], then
press .
9 Press V/v to select [Off], then press
.
The test tone signals are not output from the
HDMI (OUT) jack.
To adjust the volume of all the speakers at one
time, press VOL +/–.
Using the Sleep Timer
You can set the system to turn off at a
preset time, so you can fall asleep listening
to music. The time can be preset in intervals
of 10 minutes.
Press SLEEP.
Each time you press SLEEP, the minutes
display (the remaining time) in the top
panel display changes by 10 minutes.
When you set the sleep timer, the
remaining time appears every 5 minutes.
When the remaining time is less than
2 minutes, “SLEEP” flashes in the top
panel display.
To check the remaining
time
Press SLEEP once.
To change the remaining
time
Press SLEEP repeatedly.
Note
Note
Tip