Filter
Top Products
Overview
Location and Function of Parts
12
Use this connector to control this unit by
connecting it to equipment such as an external
equipment which supports the RS-232C interface.
0 DV IN (i.LINK) connector (6-pin)
This connector inputs digital video signals
conforming to the i.LINK protocol.
Also, this connector is used to control this unit by
connecting it to equipment such as an external
equipment which supports i.LINK.
qa USB connector
This connector is used to control this unit by
connecting it to equipment such as an external
equipment which supports a USB interface.
This connector is USB 2.0 which supports Full-
speed USB (12Mbps).
qs Equipotential ground terminal connector
This connector is used to connect to the
equipotential plug to bring the various parts of the
system to the same potential.
See “Important safeguards/notices for use in the
medical environments” on page 2.
qd -AC IN connector
Use power cord suitable for your local power
supply (not supplied).
See “WARNING on power connection” and
“WARNING on power connection for medical use”
on page 2.