Filter
Top Products
Recording
Recording
26
The message “NOW SAVING...” appears and the
unit starts to save the setting.
When the saving is completed, the message
disappears and the unit returns to the normal
display.
The recording mode is executed.
Recording
The unit allows you to record up to 49 titles on one disc.
Also, you can mark indexes at desired points during
recording.
When you record additional data on an already recorded
disc, the unit starts from the beginning of the blank
portion of the disc.
Notes
• If you load a disc which is full, a disc on which 49
titles have already been recorded, and so on, you
cannot record any data. Be sure to confirm the disc
before using it.
• When the remaining time of the disc becomes five
minutes, the main display section of the front panel
display (TITLE/CHAP/time indicator) blinks.
• Before performing the important recording, be sure to
try to record whether or not the unit records correctly.
Recording Titles
1
Press the 1 (power) switch to turn the power on.
The message “Welcome” appears on the front
panel.
When the message changes to “Now loading...,”
and then to “NO DISC!,” go to the next operation.
Note
If the power is not turned on and the front panel
display does not light even if you press the 1
(power) switch, check whether the MAIN POWER
switch on the rear panel is set to the ] (on) side.
1
2,4
6
5
3