Filter
Top Products
Overview
Setup Preparation
20
Selecting the Remote Interface
The REMOTE I/F sub menu of the SETUP MENU
allows you to select the interface to be used to control
the unit remotely.
The factory setting is RS-232C.
1
Press the MENU button.
The TOP menu appears.
2
Select “SETUP MENU” by pressing the V or v
button.
“SETUP MENU” is highlighted.
3
Press the b button.
The SETUP MENU appears.
4
Select “REMOTE I/F” by pressing the v button.
5
Press the b button.
The REMOTE I/F sub menu appears.
6
Select the desired remote interface by pressing the
V or v button.
The selected remote interface is highlighted.
7
1
2,4,6
3,5
Item Interface
RS232C To control the unit from external
equipment connected to the RS-
232C connector.
a)
(Factory setting)
iLINK To control the unit from external
equipment connected to the i.LINK
connector.
b)
USB To control the unit from external
equipment connected to the USB
connector.
c)