Filter
Top Products
Recording
Recording
30
The TOP menu appears.
2
Select “SETUP MENU” by pressing the V or v
button, and press the b button with “SETUP
MENU” highlighted.
The SETUP MENU appears.
3
Select “PRE REC” by pressing the V or v button.
4
Press the b button.
The PRE REC sub menu appears.
5
Select the desired mode by pressing the V or v
button.
6
Press the SET button.
The message “NOW SAVING...” appears and the
unit starts to save the setting.
When the saving is completed, the message
disappears and the unit returns to the normal
display.
The setting for the previous recording is executed.
When the Disc Becomes Full
During Recording
At the factory setting, the unit stops recording
automatically and the disc tray opens.
The DISC END sub menu of the SETUP MENU allows
you to change this setting.
1
Press the MENU button.
The TOP menu appears.
2
Select “SETUP MENU” by pressing the V or v
button and press the b button with “SETUP
MENU” highlighted.
Mode Setting
OFF To record the video signal promptly
after you start recording. (Factory
setting)
ON To start recording using the last 5
seconds of video data saved
previously.