Filter
Top Products
Chapter 12
Setup Menus
12-28
Chapter 12
Setup Menus
12-4 Items in the Extended Setup Menu
Menu items in the range 800 to 899, relating to audio control (Continued)
Item number
Item name
Settings
823 NAU FLG PB Controls the non-audio flag when the playback format is Digital Betacam or
Betacam SX.
Sub-item
1
CH1/CH2
During playback (except E-E mode), sets the digital audio non-audio flag as
follows.
OFF : OFF (the data is audio)
ON: ON (the data is non-audio)
AUTO: As follows, depending on whether tape data has been confirmed.
• Tape data has been read and confirmed: ON or OFF, according to the data.
• Tape data has not been confirmed: Current state is maintained.
Notes
• During playback of analog tapes, the non-audio flag is OFF regardless of the
setting of this item.
• In the MPEG IMX format, operation is the same as for the OFF setting or AUTO
setting.
• Recording operation follows the setting of maintenance menu item M372.
For more information about the maintenance menu item M372, refer to the
Maintenance Manual.
824 ANALOG OUTPUT
SELECT
Select the analog audio signals (tracks 1 to 8) to be assigned to audio output
channels 1 to 4.
Note
The settings tr5/6 and tr7/8 are only valid for MPEG IMX playback on the DVW-
M2000/M2000P.
Sub-item
1 CH1/CH2 tr1/2 : Assign tracks 1 and 2 to audio output channels 1 and 2
tr3/4: Assign tracks 3 and 4 to audio output channels 1 and 2
tr5/6: Assign tracks 5 and 6 to audio output channels 1 and 2
tr7/8: Assign tracks 7 and 8 to audio output channels 1 and 2
2
CH3/CH4
tr1/2: Assign tracks 1 and 2 to audio output channels 3 and 4
tr3/4 : Assign tracks 3 and 4 to audio output channels 3 and 4
tr5/6: Assign tracks 5 and 6 to audio output channels 3 and 4
tr7/8: Assign tracks 7 and 8 to audio output channels 3 and 4
3 CH5/CH6
(DVW-M2000/
M2000P only)
Valid only for an
MPEG IMX format
8-channel recording
tape
4
CH7/CH8
(DVW-M2000/
M2000P only)
Valid only for an
MPEG IMX format
8-channel recording
tape
825 AUDIO ADVANCE MODE
Set the audio signal output phase.
OFF : Same as the video output phase
ON: One frame ahead of the video output phase
2
CH3/CH4