Filter
Top Products
Chapter 13 Setup Utility Menu Functions
Chapter 13 Setup Utility Menu Functions 13-1
Chapter 13 Setup Utility Menu Functions
You can use the setup utility menu to download files
saved in memory sticks, to upload files to memory
sticks, and to format memory sticks from MS-DOS.
Call up the setup utility menu from the function menu.
See Section 11-2 “Function Menu Item List” (page 11-3) for
more information about the function menu.
See Section 3-6 “Using a Memory Stick” (page 3-12) for
more information about memory sticks.
To display the setup utility menu
Display page 5 of the function menu in the menu
display section, and press the F5 (SUPUTL) button.
The setup utility menu appears in the menu display
section.
SUP
UTL
EXIT
SETUP MENU UTILITY (MEMORY STICK)
DNLOAD UPLOAD FORMAT
HOME F1 F2 F3 F4 F5 F6
This menu provides the following functions.
F1 (DNLOAD): Downloads data from the memory
stick.
F2 (UPLOAD): Uploads data to the memory stick.
F3 (FORMAT): Formats the memory stick.
To return to the page 5 screen
Press the F6 (EXIT) button.
To display the setup utility menu on a monitor
Connect a monitor to the COMPOSITE VIDEO
OUTPUT 3 (SUPER) or SDI OUTPUT 3 (SUPER)
connector of this unit.
SETUP MENU UTILITY
F1:SETUP MENU DOWNLOAD
F2:SETUP MENU UPLOAD
F3:FORMAT STICK
MEMORY STICK
13-1 Overview of Setup Utility Menu Functions
13-1-1 Using Memory Stick Data
Refer to the Maintenance manual Volume 1 for more
information about downloading, uploading, and formatting
operations.
To download files saved in memory sticks
Proceed as follows.
1 Press the F1 (DNLOAD) button.
The menu display changes, allowing you to
execute the download. The name of the currently
selected file is flashing on the screen.
SUP
UTL
EXITSET
DOWNLOAD SETUP - DBMNRXXX.SUP
HOME F1 F2 F3 F4 F5 F6
2 With the HOME button held down, rotate the
MULTI CONTROL knob to select the file to
download.
3 Rotate the MULTI CONTROL knob to display
“EXEC OFF”.
SUP
UTL
EXITSET
DOWNLOAD SETUP - EXEC OFF
HOME F1 F2 F3 F4 F5 F6
4 With the HOME button held down, rotate the
MULTI CONTROL knob to switch EXEC OFF to
EXEC ON.
SUP
UTL
EXITSET
DOWNLOAD SETUP - EXEC ON
HOME F1 F2 F3 F4 F5 F6
When you want to redo a file selection, rotate the
MULTI CONTROL knob to display the file name
again, then go back to step 2.
The monitor screen display changes as follows.
STICK TO ROM
File:
EXECUTE - ON
DBMNRXXX.SUP
SETUP MENU DOWNLOAD
STICK -> VTR
(Continued)