Filter
Top Products
Convenient Functions
63
GB
instrument, such as a paper clip, can be
used.)
The PAIRING indicator of the surround
amplifier flashes when pairing starts.
When wireless transmission is activated,
the PAIRING indicator of the surround
amplifier turns on and “PAIRING” and
“COMPLETE” appear alternately in the
front panel display.
x For the S-AIR receiver
Refer to the operating instructions of the
S-AIR receiver.
When wireless transmission is activated,
“PAIRING” and “COMPLETE” appear
alternately in the front panel display.
Note
• Perform pairing within several minutes of Step
5. If you do not do so, “PAIRING” and
“INCOMPLETE” appear alternately in the front
panel display. To continue pairing, press and
start again from Step 5. To cancel pairing, press
SYSTEM MENU.
7 Press SYSTEM MENU.
To cancel pairing
Change the ID of the main and sub unit
(page 61).
If you use multiple wireless systems, such as
wireless LAN or Bluetooth, the transmission of
S-AIR signals or other wireless signals may be
unstable. In this case, the transmission may be
improved by changing the following “RF
CHANGE” setting.
1 Press SYSTEM MENU.
2 Press X/x to select “RF CHANGE,”
then press or c.
The selected item appears in the front panel
display.
3 Press X/x to select the desired setting,
then press .
• “AUTO”: Normally select this. The
system changes “RF CHANGE” to “ON”
or “OFF” automatically.
• “ON”: The system transmits sound by
searching for the better channel for
transmitting.
• “OFF”: The system transmits sound by
fixing the channel for transmitting.
4 Press SYSTEM MENU.
5 When you set “RF CHANGE” to “OFF,”
select the ID so that wireless
transmission is most stable (page 61).
Note
• In most cases, you will not need to change this
setting.
– If “RF CHANGE” is set to “OFF,” transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
Transferring Songs onto
a USB Device
You can transfer songs on an audio CD or radio
programs onto a USB device by encoding to
MP3 format. You can also transfer MP3 files on
a DATA CD/DATA DVD onto a USB device.
For connecting the USB device, see “Playing
Files on a Disc/USB Device” (page 38).
The transferred music is limited to private use
only. Use of the music beyond this limit requires
permission of the copyright holders.
If wireless transmission is
unstable
For the surround amplifier
For the S-AIR receiver