Sony GV-D200 VCR User Manual


 
7
Getting started
Step 1 Connecting to a TV
If your TV is already connected to the other VCR
Connect your VCR to the LINE IN input on the other VCR with the A/V connecting
cable (supplied). Set the input selector on the VCR to LINE.
If your TV or the other VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white plug to the audio input jack on the other VCR or the TV. You do not connect the
red plug.
With this connection, the sound is monaural even in stereo mode.
To connect to a TV or the other VCR without Video/Audio jacks
Use an NTSC system RFU adaptor (not supplied).
Refer to the operating instructions of your TV or the other VCR and the RFU adaptor.
With an RFU adaptor, the sound is monaural even on stereo models.
If your TV or the other VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S VIDEO OUT jack on your VCR and the
S video jack on the TV or the other VCR.
Connect your VCR to your TV or to the other VCR with the A/V connecting cable
supplied with your VCR to watch the playback picture on the TV screen. Connect the
plugs to the jacks of the same colors on your VCR and the TV or the other VCR. Refer to
the operating instructions of your TV or the other VCR.
Open the jack cover. Connect your VCR to the TV using the A/V connecting cable.
Then, set the TV/VCR selector on the TV to VCR.
: Signal flow
A/V connecting cable (supplied)
S video cable (not supplied)
S VIDEO OUT
AUDIO OUT
VIDEO OUT
S VIDEO
VIDEO
AUDIO
IN