Filter
Top Products
93
Troubleshooting
The remaining tape indicator is not displayed.
•Set [ REMAINING] to [ON] to always display the remaining tape indicator (p. 73).
The cassette is noisier during rewinding or fast-forwarding.
• When using the AC Adaptor, rewind/fast forward speed increases (compared with battery
operation) and therefore increases noise. This is not a malfunction.
You cannot delete pictures of the “Memory Stick Duo.”
• The pictures are protected. Release the protect function on your computer, etc.
If you are playing back pictures stored on a “Memory Stick Duo,” see also the Cassette tapes/
“Memory Stick Duo” section (
p. 92).
The recording does not start when you press the REC START/STOP button.
• Slide the POWER switch to CAMERA (p. 25).
• The tape has reached the end. Rewind it, or insert a new cassette.
• Set the write-protect tab of the cassette to REC or insert a new cassette (p. 105).
• The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave
your camcorder for at least 1 hour, then re-insert the cassette (
p. 110).
The handle zoom does not work.
• Set the handle zoom speed switch to FIX or VAR (p. 28).
You cannot record on the “Memory Stick Duo.”
• The “Memory Stick Duo” is full. Delete unnecessary pictures recorded on the “Memory Stick
Duo” (
p. 47).
• Format the “Memory Stick Duo” on your camcorder or insert another “Memory Stick Duo”
(
p. 77).
• You cannot record still images on the “Memory Stick Duo” in the following cases.
–While executing [FADER]
–While executing [SMTH SLW REC]
–When the shutter speed is slower than 1/50
–While using shot transition
• Set [PHOTO/EXP.FOCUS] to [PHOTO] (p. 79).
You cannot record a smooth transition on a tape from the last recorded scene
to the next.
• Perform End search (p. 42).
• Do not remove the cassette (the picture will be recorded continuously without a break even
when you turn the power off).
• Do not record pictures in the HDV and DV formats on the same tape.
Recording
Continued ,