Filter
Top Products
Chapter 5
Shot Mark Function
5-2 Chapter 5 Shot Mark Function
This section describes the settings in the shot mark
operation menu.
Displaying the shot mark operation menu
With the function menu HOME page showing in the
menu display, hold down the MARK button, and press
the F5 (MENU) button.
The following menu appears on the monitor.
GO1:SEARCH TYPE - all
GO2:LISTING TYPE
SHOT MARKER
GO3:RS.MARK MODE
GO4:MARK IN REC shot1
5-2 Shot Mark Operation Menu
MARK button
F5 (MENU) button
Details of the shot mark operation menu
The shot mark operation menu comprises two items,
G01 and G02. The detailed contents appear in the
following table.
Changing the menu settings
The basic procedure for accessing menu items and
changing settings is the same as for the setup menus.
Note, however, the operations in “To change the
settings of menu items with sub-items” (page 9-3) for
item G02.
For details of the setup menu operations, see Section 9-2
“Setup Menu Operations”(page 9-2).
G02 LISTING
TYPE
For each type of shot mark,
select whether to read into the
list (ON) or not read (OFF):
rec start mark
shot mark 1
shot mark 2
post mark
Item
number
Item name Settings
G01
Select which shot mark type the
index function searches for, from
the following possibilities:
all
rec start mark
shot mark 1
shot mark 2
post mark
SEARCH
TYPE
Z