Filter
Top Products
Chapter 9
Setup Menus
Chapter 9
Setup Menus 9-13
201
Item number
Item name
Settings
PARA RUN
202
Menu items in the range 200 to 299, relating to the remote control interface
CF FLAG
(Valid only in 50i or 25PsF
mode.)
Select the mode for locking to the color framing sent from the remote controller.
8F : Eight-field locking mode
4F/8F: Four- or eight-field locking mode
211 REMOTE1 PORT Select how to use the REMOTE 1-IN(9P) and REMOTE 1-OUT(9P) connectors
on the connector panel.
I&O : Both the IN and OUT connectors are effective whether in local or remote
mode.
IN: Only the IN connector is effective whether in local or remote mode.
OUT: Only the OUT connector is effective whether in local or remote mode.
PANEL: Allows you to select i&o, in, or out using the function menu.
Note
When selecting “PANEL”, first define user-defined function key RMT1 in the
HOME2 page.
On how to define user-defined function keys in the HOME2 page, refer to the
Maintenance Manual Volume 1.
Select whether or not to use synchronized operation for two or more VTRs.
DIS : No synchronized operation
ENA: Use synchronized operation
Note
To use synchronized operation for two or more VTRs, set item 201 to “ENA” on
all of the VTRs.
212
VIDEO REMOTE
CONTROL SELECT
(Invalid in 24PsF or
23.98PsF mode.)
Make settings for control from HKDV-900/503 via the VIDEO CONTROL (15P)
connector.
Sub-item
1 IMAGE
ENHANCER
Select whether to control the up-converter or down-converter whether controlling
the image enhancer.
down : Control the down-converter.
up: Control the up-converter.
u&d : Control both the up-converter and down-converter.
2 D2 SETUP Select the menu item to be controlled by the SETUP dial on the HKDV-900/503
with the D2 button pressed.
setup : Sub-item (OUTPUT LEVEL) of menu item 713 (VIDEO SETUP
REFERENCE LEVEL)
black : Menu item 718 (SETUP LEVEL)
For details, see the description of menu item 718.
Note
After changing the setting for this item, power off this unit or HKDV-900/503 and
power it on again.